Conduit Expansion Joints Specifications
(print this page for submittal)

Applications
KorKap XJG type expansion joints are used to connect two lengths of
conduit subject to longitudinal movement, including that caused in
long runs by thermal expansion and contraction.

Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating
• 10 trade sizes from 1/2" through 4".
• Sealing sleeves on all conduit openings
• Supplied with required external bonding jumper
• Available with either 4" or 8" maximum movement

Standards
• UL Listed Standard 514B
• CSA Standard: C22.2 No. 18

APPROVAL STAMP:

General Disclaimers
1. All weights and dimensions are approximate and are subject to change without notice.

2. Robroy reserves the right to make engineering changes as needed.

3. Catalog numbers are not intended to represent specific manufacturers.

4. Unless indicated otherwise, all weights and measures are in inch-pound units.
1100 US Highway 271 South, Gilmer, TX 75644 • Phone: 903.843.6562 • Fax: 903.843.5595
Robroy Ethics Hotline