GUA Series Specifications
(print this page for submittal)
Applications
KorKap GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.
Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating
• Trade sizes from 1/2" through 2" in various styles and configurations
• Sealing sleeves on all conduit openings
• Neoprene O-ring is standard
• Molded-in PVC seal preserves venting characteristics of fitting but seals out corrosives
• Standard material is a cast iron alloy body with a copper-free aluminum cover. Consult Factory for availability of cast iron covers • Internal green grounding screw is standard
Standards
• National Electrical Code:
• Class l, Groups C, D
• Class II, Groups E, F, G
• Class III
• UL Standard 886
• ANSI Standard C-33.27
• CSA Standard: C22.2 No. 30
• NEMA/EEMAC 3,4
OE Series Specifications
Applications
KorKap OE Series Conduit Outlet Boxes are installed in hazardous location conduit systems to serve as pulling and splicing fittings, to connect runs of conduit, to change the direction of a conduit run, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit system is maintained across assembled joints.
Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating
• Available in 1/2" or 3/4" trade sizes
• Molded in PVC cover to body gasket seals corrosives out
• Sealing sleeves on all conduit openings
• Compact design saves space
• Encapsulated stainless steel cover screws
Standards
• National Electrical Code:
Class l, Groups C, D
Class ll, Groups E, F, G
Class lll
• UL Standard 886
• ANSI Standard C33.27
• CSA Standard: C22.2 No. 30
EAB Series Specifications
Applications
KorKap EAB series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers. Electrical continuity of the conduit
system is maintained across assembled joints.
Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating
• Trade sizes from 1/2" through 2" in various styles and configurations
• 16 Pitch threads on cover opening
• Cast mounting lugs next to hubs
• Sealing sleeves on all conduit openings
• Neoprene O-ring is standard
• Molded-in PVC seal preserves venting characteristics of fitting but seals out corrosives
• Standard material is a cast iron alloy body with a copper free aluminum cover. Consult Factory for availability of cast iron covers
• Internal green grounding screw is standard
Standards
• Class l, Divisions 1 and 2, Groups A, B, C, D
• Class ll, Division 1, Groups E, F, G
• Class lll
• UL Standard 886
• CSA Standard: C22.2 No.30
• NEMA 3, 4, 7ABCD, 9EFG
(print this page for submittal)
