Malleable Elbows Specifications
(print this page for product submittal)

Applications
KorKap EL style malleable elbows are used in a conduit
run to change direction 90° or to terminate at a fitting or
box. They are available with male threads only, female
threads only, or male and female threads.

Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating
• Various configurations in 10 trade sizes from 1/2"
through 4".
• Sealing sleeves on all conduit openings

Standards
• National Electric Code/CEC
1/2", 3/4", 1"
Class I, Division 1 & 2, Groups A, B, C, D
Class II, Division 1, Groups E, F, G
Class II, Division 2, Groups F, G
Class III
• All sizes
Class I, Division 1 & 2, Groups C, D
Class II, Division 1, Groups E, F, G
Class II, Division 2, Groups F, G
Class III
• UL Standard 886
• CSA Standard: C22.2 No. 30

APPROVAL STAMP:

General Disclaimers
1. All weights and dimensions are approximate and are subject to change without notice.

2. Robroy reserves the right to make engineering changes as needed.

3. Catalog numbers are not intended to represent specific manufacturers.

4. Unless indicated otherwise, all weights and measures are in inch-pound units.
1100 US Highway 271 South, Gilmer, TX 75644 • Phone: 903.843.6562 • Fax: 903.843.5595
Robroy Ethics Hotline