LBY Series Specifications
(print this page for submittal)

Applications
KorKap LBY type elbows are used as service entrance
elbows between service entrance and vertical
weatherhead conduit runs, to change direction of a
conduit run 90° when space is limited, and for pull
outlets. They are available for general service.
(Series KKLBY1 through KKLBY5) and hazardous
(Series KKLBY15 through KKLBY55) locations.

Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating
• 5 trade sizes from 1/2" through 1-1/2".
• Sealing sleeves on all conduit openings
• Molded PVC gasket seals fitting cover to body

Standards
• UL Standard 5148

APPROVAL STAMP:

General Disclaimers
1. All weights and dimensions are approximate and are subject to change without notice.

2. Robroy reserves the right to make engineering changes as needed.

3. Catalog numbers are not intended to represent specific manufacturers.

4. Unless indicated otherwise, all weights and measures are in inch-pound units.
1100 US Highway 271 South, Gilmer, TX 75644 • Phone: 903.843.6562 • Fax: 903.843.5595
Robroy Ethics Hotline