Thread and Coupling Specifications
(print this page for submittal)

Applications
PVC coated rigid metal conduit couplings with gray urethane
interior coating connects coated conduit sections. Electrical
continuity is maintained across assembled joints. PVC sleeves on
couplings seal off on conduit PVC coating when assembled to
prevent corrosive liquids and vapors from attacking threaded
joints.

Physical Properties
• 40 mil gray PVC exterior coating
• 2 mil gray urethane interior coating over galvanized threads
• 12 trade sizes from 1/2” through 6”
• Sealing sleeves on both ends
• Molded external ribs on 1/2 ” – 4” to prevent tool damage during assembly
• Couplings are straight tapped

Standards
• UL Listed Standard 6

(print this page for submittal)

APPROVAL STAMP:

General Disclaimers
1. All weights and dimensions are approximate and are subject to change without notice.

2. Robroy reserves the right to make engineering changes as needed.

3. Catalog numbers are not intended to represent specific manufacturers.

4. Unless indicated otherwise, all weights and measures are in inch-pound units.
1100 US Highway 271 South, Gilmer, TX 75644 • Phone: 903.843.6562 • Fax: 903.843.5595
Robroy Ethics Hotline